Backhoe Bucket

Posts Tagged ‘part’

Product Description
Replacement part # 100-4642 16″ BACKHOE BUCKET ASM for Toro Lawn mower / Tractors / String Trimmers

Replacement part For Toro Lawn mower # 100-4642 16″ BACKHOE BUCKET ASM

Product Description
Replacement part # 100-4641 12″ BACKHOE BUCKET ASM for Toro Lawn mower / Tractors / String Trimmers

Replacement part For Toro Lawn mower # 100-4641 12″ BACKHOE BUCKET ASM

Product Description
Replacement part # 100-4640 9″ BACKHOE BUCKET ASM for Toro Lawn mower / Tractors / String Trimmers

Replacement part For Toro Lawn mower # 100-4640 9″ BACKHOE BUCKET ASM

Product Description
Replacement part # 108-5683 13 INCH BACKHOE BUCKET ASMfor Toro Lawn mower / Tractors / String Trimmers

Replacement part For Toro Lawn mower # 108-5683 13 INCH BACKHOE BUCKET ASM

this is the second part to the bucket repair and mod that i did. this part shows what i did with the pin locations and how i went about doing it

just another project i did may be 2 or 3 parts. had to replace the cutting edge plate also relocate the mounting points so it will fit a quick conect set up on a volvo excavator was a old case backhoe bucket. dont forget to comment rate and subscribe!!

Product Description
This part of ISO 14397 specifies a test method for measuring the breakout forces and the lift capacities to maximum lift height of wheel and crawler loaders and the loader portion of backhoe loaders, as these machine types are defined in ISO 6165. This title may contain less than 24 pages of technical content.

ISO 14397-2:2002, Earth-moving machinery – Loaders and backhoe loaders – Part 2: Test method for measuring breakout forces and lift capacity to maximum lift height

Product Description
This part of ISO 14397 specifies the means for determining the rated operating capacity of wheel and crawler loaders and of the loader portion of backhoe loaders, as these machine types are defined in ISO 6165, including standard methods for calculation and test verification of the tipping load. This title may contain less than 24 pages of technical content.

ISO 14397-1:2002, Earth-moving machinery – Loaders and backhoe loaders – Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load

What is the part number of a transmission off of a Ingersoll Rand BL 275 backhoe?

I would like to find a replacement transmission and am not sure of the part number. Also if you know where i could find one, please let me know.

Product Description
With a thunderous motor and clanging gears a bulldozer roars into action. These whimsical figures are crafted from an amazing assortment of bicycle and automobile parts. Armando Ramirez recycles them as rustic art. He creates the hoe from a sparkplug gear screws and metal bits left from a die cutter. A discarded pulley becomes part of the rear shovel and the machine moves on bearings. Ramirez does not give his sculptures a fine polished finish therefore smudges and scratches may be present.

NOVICA Auto part statuette, ‘Rustic Backhoe Loader’